Product Description
The Ford 6.0 High Pressure Oil Pump Fitting Update Kit is a New One-Piece High Pressure Oil Connectordesigned to address the issues with the previous component. The Ford 6.0 HPOP Fitting Update Kit 4C3Z9B246F is effective in preventing STC fitting failures and continues to be an approved repair. The installation of the Ford 6.0 HPOP Update Kit 4C3Z9B246F is highly recommended when you're replacing your EGR cooler, installing a EGR delete or oil cooler. It is very highly recommended that you install the Ford 6.0 STC H anytime the pump is exposed during repairs.
The Ford 6.0 High Pressure Oil Pump Fitting Update Kit is installed in production engines starting from:
- V8 engines: Engine serial # 431736 on 2/9/07.
- V6 engines: Engine serial # 431705 on 2/8/07.
The Ford 6.0 HPOP Update Kit is the most current version available to service failed Snap To Connect or Quick Connect fittings on 2005 through 2007 Ford and International trucks.
The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F works on the following affected engines:
- International VT-275,
- International VT-375
- Ford 4.5L Power Stroke
- Ford 6.0L Power Stroke diesel engines.
This new Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F bracket is designed to support the fitting and branch tube and eliminate the possibility of the fitting to become separated.
The Ford 4C3Z-9B246-F 6.0 Update Kit contains:
- 1 Support Bracket
- 1 Hydraulic Pump Seal Kit
- 1 Branch Tube Adapter - Male
- 1 HPOP Adapter Fitting - Female
- 2 M6 X 35 mm Branch Tube Bolts
- 2 M8 X 60 mm Pump Bolts
- 1 M8 X 45 mm Pump Bolt
The Updated Ford STC HPOP Kit was developed containing the following parts:
- replacement fitting
- connector
- bracket that supported the assembly preventing any movement of the branch tube and connector.
Installing this OEM Ford STC HPOP Kit is a recommended preventative measure for piece of mind as it fixes a weak link in the Ford 6.0L Powerstroke!
